Hammond XK-2, Быстрое руководство по функциям

Страница: 23 / 116

19 Drawbars
Hammond XK-2 Quick Features Guide
}2 DB REGIST1
UM 000000000
Select
EDIT PARAMETER
}14 DB FOLDBACK1
UM LOW NOTE 2C
Ë
Drawbar Fold Back
There are two function selections to the Drawbar Fold Back Advanced Feature Menu of the XK-2: (1) Select how low the
Sub-Fundamental Drawbar will play on each manual (from “2C” down to “1C”). (2) Set the upper frequency limit for each
manual (from “4G” to “5C”).
On the earliest model Hammond Organs, the Sub-Fundamental Drawbar (the one marked, “16'”) would continue to play all
the way down to the lowest "C" ("1C"). Newer models such as the Hammond Models X-66, X-77 and Concorde do the
same, however, the 8th harmonic Drawbar (the one marked “1'”) continues to play up the manual to the next to highest "C"
("5C") on the manual. On a B-3, the lowest note produced by the Sub-Fundamental Drawbar is the 2nd "C" ("2C") from
the left end of the manual, while the highest note that can be played by the 8th harmonic Drawbar is the 4th "F < " from the
left end of the manual. The lower and higher keys on the manual "Fold Back,” in that they repeat the pitches played by other
notes.
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the NAME/DRAWBAR Select Touch Button two times. The Information Center Display should
look like this:
3. Touch the PAGE “ < ” Select Touch Button twelve times. The Information Center Display should look
like this:
4. Now select the option you wish by doing the following:
Use the PAGE " < " Select Touch Button to scroll forward through the manual and note selections.
Use the PAGE " = " Select Touch Button to scroll backward through the manual and note selections.
Use the VALUE " > " Select Touch Button to scroll up through the Foldback numbers.
Use the VALUE " ? " Select Touch Button to scroll down through the Foldback numbers.
This data CAN be stored to a Preset. To see a total listing of all Preset Parameters, see the Preset Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.