background image

117

HA<O>

 

XK-5

 Owner’s Playing Guide

UPPER

BANK KEY

PATCH

PEDAL

LOWER

UPPER

BANK KEY

PATCH

PEDAL

LOWER

UPPER

BANK KEY

PATCH

PEDAL

LOWER

UPPER

BANK KEY

PATCH

PEDAL

LOWER

LOCATE MENU A

If Menu A is not displayed, press the [

q

] Touch Button until “A” 

shows in the upper left corner of the display.

GO TO PATCH FUNCTION Mode

Press [ENTER] and go to PATCH FUNCTION Mode.

INPUT THE NAME

You can enter a name using up to 10 characters.

[

][

] Touch Buttons:

  Moves the cursor.

[VALUE] Rotary Knob:

 

Selects letters.

The available characters include: Punctuation Marks (space - . ‘ 

&), Numeric Characters (0 ~ 9), Upper-case Letters (“A ~ Z”), and 

Lower-case Letters (“a ~ z”).

NOTE:  This procedure is for naming the UPPER Manual. The 

LOWER Manual Patch is named separately (P. 110).

Press the [

] Touch Button twice.  The word “PATCH” should 

blink.

SELECT A PATCH

UPPER

BANK KEY

PATCH

PEDAL

LOWER

NAMING A PATCH

LOCATE THE MENU Mode

Press the [MENU/EXIT] Touch Button.  MENU Mode will be 

displayed.

6

Press [ENTER] to record the Custom Contact with your cus-

tom name.  The display will show, “

Recording Patch...

” for 

approximately 1 second.
When the message no longer displays, your custom name has been 

saved.

NOTE:  If you DO NOT wish to overwrite the currently selected  

Patch, press the [MENU/EXIT] or [PLAY] Touch Button.

7

After you have finished naming 

your Patch, press the [RECORD] 

Touch Button.  The display will 

show:

[ENTER] to Overwrite

on the bottom line.

1

2

4

5

3

Содержание A-3





















































































































































































Отзывы: