Hammerhead HG2200AT, Руководство оператора

Страница: 37 / 146

HG2200/HG2200AT Operator’s Manual
Wireless Remote Controller
36 - Controls
7. Communication link
indicator
Indicates the status of the
transmitter and receiver link.
• Blinking yellow indicates
no communication link.
• Blinking green indicates
good communication link.
• Steady red indicates an
internal problem. Contact
your HammerHead
®
dealer.
An active communication link is
required for wireless control.
8. Power status indicator Indicates battery status and
cable connection.
• Off indicates good battery
level.
• Blinking red indicates low
battery level.
• Solid green indicates
transmitter is connected
to machine.
9. Power/Start/Horn
switch
To turn power on, hold switch
up until yellow LED indicator
comes on and then blinks
green. Release switch.
Wireless remote control light
(page 4) will shine.
To start operation, hold switch
up with joystick controls in
neutral position until horn
sounds. Release switch.
To use horn, move switch up.
Release switch to stop horn.
To turn power off, hold switch
down until LED indicators go
off.
Wireless remote controller shuts off
and yellow LED indicator blinks after
one minute of inactivity. Hold switch
up twice to restart.
IMPORTANT: Must be pushed to
initialize the transmitter each time the
menu selection changes.
10. Right multifunction
joystick
Move joystick to control
selected system.
See “Wireless Remote Controller
Secondary Functions” on page 37.
Item Description Notes
c00ic008w.eps
c00ic044h.eps