Hammerhead HG2200AT, Руководство оператора

Страница: 65 / 146

Drive - 64
HG2200/HG2200AT Operator’s Manual
Start Unit
Start Unit
Before operating machine, read engine manufacturer’s starting and operating instructions.
1. Ensure winch control lever is in neutral.
2. Ensure mode selection switch is in neutral.
3. Set throttle at 1/8 to 1/4 throttle.
4. Turn ignition switch to the run position (key on, engine off). Cold start indicator will light if necessary.
5. When cold start wait indicator turns off, turn ignition switch clockwise to start machine.
6. Run engine at half throttle or less for five minutes before operating machine. Ensure all controls
function properly.
Misuse of machine can cause death or serious injury.
Read and understand operator’s manual and all other safety instructions
before use.
To help avoid injury:
• Wear hard hat, safety glasses, and other protective equipment required by job. Do not wear jewelry
or loose clothing that can catch on controls.
• Clear the area around the machine of all bystanders.
Fire or explosion possible. Do not use starter
fluid.
NOTICE: If engine turns but not start within 20 seconds, allow starter to cool one minute before
trying to start again.