Hammer K2 M, Перевод оригинальной инструкции по эксплуатации

Страница: 19 / 56

19
K2 M - Part 2/2 Adjustments and tool changes
1.4.4 Remove the riving knife
1
2
3
Fig. 15: Remove the riving knife
1 Clamping screw
2 Riving knife holder
3 Riving knife
WARNING
Serious injury arising from contact with the rotating saw blade
If working without a riving knife, the workpiece could become
jammed after the saw blade.
− Operation without the riving knife is only allowed when using
grooving tools.
− A riving knife is required when working with circular saw
blades.
Remove the riving knife:
Tool:
● Combination wrench 17 mm
1.
Preparing the machine for a tool change.
⮫
Chapter 1.3.2 ‘Prepare to
change tooling’ on page 11
2. Loosen the clamping screw.
3. Pull the riving knife upwards out of the riving knife holder.
4.
WARNING
Flying pieces
Severe injuries and damage to property.
●
Minimum tightening torque of the clamping bolt: 25 Nm.
Tighten the clamping screw.