Hammer K2 M, Перевод оригинальной инструкции по эксплуатации

Страница: 29 / 56

29
K2 M - Part 2/2 Use
7. On machines without extraction system control, switch on the extraction
system.
8. Only switch the machine on once the workpiece has been placed in the
correct position.
9. Feed the workpiece evenly past the saw blade, keeping your fingers balled
into a fist.
10. Use the push stick once you are at the end of the cut.
11. Once the cut is finished, switch the machine off.
2.3.5 Longitudinal cut / cutting of strips
1
2
3
Fig. 24: Rip cut
1 Saw blade
2 Fence plate (guide)
3 imaginary 45° line
3
Fig. 25: Cutting strips