Hammer K2 M, Перевод оригинальной инструкции по эксплуатации

Страница: 21 / 56

21
K2 M - Part 2/2 Adjustments and tool changes
1.5.2 Clamping the grooving tool
1
2
3
4
5
6
7
Fig. 17: Insert grooving tool
1 Flange for grooving tools
2 Clamping screw grooving tool (M10x40 L)
3 Grooving tool
4 Grooving tool Part 1
5 Grooving tool Part 2
6 Spacer washers
7 Locking pins
WARNING
Incorrect clamping of the grooving tool
Severe injuries caused by rotating or colliding tools.
− Do not use a tool-free clamping system.
−
Always use the grooving tool flange.
Tool:
● Spanner 17 mm
● Locking pins
1. Machine preparation for working with grooving tooling.
⮫
Chapter 1.5.1
‘Retooling to an operation with grooving tools’ on page 20
2. Position the saw aggregate in the 90° position (cutting angle 0°).
3. Place the first part of the grooving tool onto the saw arbour.
🡆
Pay attention to ensure the correct rotation direction of the tool.
4. Adjust the grooving width with spacer washers.
5. Place the second part of the grooving tool onto the saw arbour.
🡆
Both tool halves must engage with each other.
6. Attach the grooving tool flange.