Hammer K2 M, Перевод оригинальной инструкции по эксплуатации

Страница: 33 / 56

33
K2 M - Part 2/2 Use
2.3.9 Working with grooving tools (Sägeboy auxiliary fence)
2
3
1
Fig. 29: Working with grooving tools
1 Grooving tool, no riving knife
2 Sägeboy auxiliary fence (accessory)
3 Template (mounted to the workpiece)
NOTICE
Collision between machine components
Material damage when swivelling the saw unit.
− Position the saw aggregate in the 90° position.
−
Do not adjust the 90° angle when operating with grooving
tooling.
WARNING
Inadequate protection when working with grooving tools
Severe injury caused by contact with a rotating grooving tool.
− Use overhead saw guard or "Sägeboy" auxiliary fence (acces-
sory art. no. 01.0.022).
− Do not pull the rip fence plate (guide) back.
− Remove the riving knife.
Work with grooving tools may only be carried out with an overhead saw guard
or Sägeboy auxiliary fence (accessory art. no. 01.0.022).
Do not, under any circumstances, use a saw blade guard (guard mounted onto
riving knife).
1. Take note of general procedures for permitted working methods.
2. Convert machine to operation with grooving tools.