Document #101-0086
54
5/22/07
3.
Unroll about 4 inches of paper and center on roller and close the platen by rotating it upward and
sliding it back until it snaps into position.
Figure 11-4
4.
Push button to ensure straight feed and tear off by pulling down on excess.
Figure 11-5
Clearing a Paper Jam in the Autocutter
If the cutter has been locked during paper cutting, power off the motor immediately and cancel the lock
by performing the following procedures manually:
1.
Tear transparent film from the upper surface of the autocutter (figure 11-6A), turn the knob in
the direction shown in figure 11-6B until the entire hole of the warm wheel can be seen from
the standby position confirmation window and retreat the moveable blade. (Figure 11-6B)
