Document #101-0086
67
5/22/07
Repeat above procedure as
needed, using Training
Coupons #3 & #4
Starting with switch #10, set
switches to "ON" position in
descending order (8,7,6...). A
flashing "P" will appear on the
LED.
Insert second Tokenote
Are you programming more
Tokenotes with a different
value?
Insert third Tokenote
Are you programming a third
Tokenote with a different
value?
Insert Training Coupon #1
Insert Tokenote
Are you programming a
second Tokenote with a
different value?
Insert Training Coupon #2
Starting with switch #1, set
switches back to original
positions in increasing order
(1,2,3,4...)
NO
YES
NO
NO
YES
YES
PROGRAMMING TOKENOTES WITH
THE STA VALIDATOR
NOTE: If programming more than one
Tokentote, coded differently but of equal
value, insert one right after the other. Make
sure that each Tokenote is accepted by the
validator.
