Hamilton Beach HB-0604 Скачать руководство пользователя страница 19

Страница: 19 / 22

b) Debris Removal from the air powered pet tool

Turn the air powered pet tool over and slide off the locking ring. (fig.8/3)

2. Pivot the lower housing and remove the clog. (fig. 8/4)

3. To reassemble, make sure that the tabs are engaged. Pivot the lower housing

closed. (fig. 8/5)

4. slip the locking ring onto the groove at the neck of the air powered pet tool to

complete the reassembly.

IMPORTANT: If the inlet, hose or extension tube is blocked, switch off the vacuum cleaner

and remove the blockage(s) before restarting the vacuum cleaner.
IMPORTANT: Cleaning the filters regularly improves the vacuuming performance. Make

sure that all the filters are replaced back into the vacuum cleaner before using. This

vacuum cleaner is intended for household use only and not for commercial or industrial

use. Store the vacuum in a cool dry area. Any other service should be performed by an

authorized service center.

TABS

fig 8/3

fig 8/4

fig 8/5

Locking

Ring

Содержание HB-0604























Результаты поиска

Содержание HB-0604

Отзывы:

Бренды по названию

Популярные бренды

Hamilton Beach HB-0604, Руководство пользователя

Результаты поиска

Содержание HB-0604

Отзывы:

Бренды по названию

Популярные бренды