Hamamatsu ENERGETIQ LDTLS TLS-EQ-77H, Руководство по эксплуатации

Страница: 14 / 45

9
Monochromator Electrical

Voltage: 24VDC

Power: 50W

Connector: 5-pin DIN female

Mating connector: 5-pin DIN male, Switchcraft 05GM5MX or equivalent

Pin connections: pins 3, 5: 24VDC; pins 1, 2, 4: 24V return
Purge gas: clean dry nitrogen, filtered to 5um, 20 psig (0.14 MPa) supply pressure

Typical flow rate: 0.4 liters/minute

Fittings: 4mm push-to-connect
Cooling fluid: >= 1 liter/minute, 20 – 24 °C, 100 psig (0.69 MPa) max. inlet pressure

Fittings: ¼ inch Swagelok
3.6. Environmental Requirements
Operating

Ambient temperature: 15-35°C

Relative Humidity: non-condensing, 80% max. for temperatures up to 31°C, decreasing linearly to
50% max. at 35°C.

Pollution Degree 2 (normally only non-conductive pollution; occasional, temporary condensation
possible)

Overvoltage Category II

Indoor use only

Opening altitude 2,000 m max.

IP Code IP20
Transport

Temperature: -5–70°C

Relative Humidity: non-condensing, 95% max.
3.7. Remote Interface
Digital Inputs

Type: Optocoupler LED

Logic: Active High

Input voltage: 5VDC

Input current: 8mA
External Interlock Input Only (pin 13)

Type: Relay Coil

Logic: Active High

Input voltage: 5VDC

Input current: 80mA
Digital Outputs

Type: Open collector to ground (digital common)

Logic: Active Low

Voltage: 30VDC max.

Sink current: 8mA max.
User Power

Voltage: 5VDC, referenced to digital common

Current: 400mA maximum