Hamamatsu ENERGETIQ LDTLS TLS-EQ-77H, Руководство по эксплуатации

Страница: 13 / 45

8
EQ-77 Lamp
# Component Description
1 Nitrogen Purge Inlet These are the fittings for the required nitrogen purge gas. With no purge, ozone will form from
atmospheric oxygen and attenuate the light output in the 220 – 280nm band. In addition,
atmospheric oxygen and water vapor will attenuate the output below 200nm.
2 Nitrogen Purge Outlet
3 Cooling Fluid Inlet These fittings are for connection of cooling fluid required by the Lamp
4 Cooling Fluid Outlet
5 Laser On Indicator This LED is illuminated when the laser is ON.
6 Control Connector (21-pin
mixed D-sub)
Provides various power and control signals to/from the Power Supply Controller. No other
connector or cable may be used with the TLS-EQ-77H other than the one supplied
7 Monochromator interface
connector
Standard mini-USB connector for control of the internal monochromator.
8 Monochromator power
supply connector
DIN connector for monochromator power (from external power supply).
9 Optical output connector SMA connector for light output
3.3. Optical Performance

Wavelength range:

TLS-EQ-77H: 400 – 1100 nm

Wavelength step size: 2 nm

Sweep time, 2 nm step: 20 ms

Return time, 1100 – 400 nm: 4 s

Output connector: SMA

Fiber output NA: 0.19 ± 0.02

Spectral width FWHM: 6.5 ± 1.5 nm

Wavelength accuracy: ± 1.0 nm

Step repeatability: ± 0.1 nm

Total output power
Wavelength, nm Min. power, mW
400 1.40
700 1.40
950 0.70
1100 0.08
3.4. Physical Specifications
Dimensions (H x W x D)

Lamp House: 266 x 432 x 222 mm (10.5 x 17.0 x 8.8 in)

Power Supply Controller: 152 x 250 x 132 mm (6.0 x 9.8 x 5.2 in)
Weight

Lamp: 16.6 kg (36.5 lb)

Controller: 2.9kg (6.5lb)
3.5. Utility requirements
Power Supply Controller Electrical

Voltage: 100 – 240 V ~ +/- 10%, 50/60 Hz, 350 W (Fuse:F5AL250V) Frequency: 50/60 Hz

Power: 350 W max

Connector: IEC320 C14 inlet