Hamamatsu Photonics C8484-16C, Инструкция по эксплуатации

Страница: 36 / 53

C8484-16C Instruction manual Ver.1.5
34
10-5 COMMAND INITIAL SETTING
Settings commands are set as shown below with the power is turned on.
These settings are initialized, regardless of the "
INI
" command.
Category Initial command Detail
Mode setting
commands
AMD N Exposure start timing Free running mode
NMD N
Exposure time setting
(in the free running mode)
Normal
EMD E
Exposure time setting
(in the external control mode)
Edge
SMD N Scan mode Norma readout
ADS 12 Digital data output bit count 12 bit
Parameter setting
commands
SHT 160
Electronic shutter speed
(in the free running mode)
160
FBL 9
Frame blanking count
(in the free running mode)
9
EST 160
Electronic shutter speed
(in the internal setting at the time of
External control mode)
160
SHA K Digital output horizontal pixel count 1024
ATP N External trigger pulse polarity Negative
SPX 2 Super pixel readout 2×2 binning
SHO 160
Horizontal offset
(in the sub-array readout)
160
SHW 1024
Horizontal line width
(in the sub-array readout)
1024
SVO 0
Vertical offset
(in the sub-array readout)
0
SVW 1024
Vertical line width
(in the sub-array readout)
1024
ESC I
Input connector
(for external trigger) Digital interface
connector
Correctional
commands
CEG L
Contrast enhancement gain Low
Other setting
commands
RES Y Responses are made to commands.