Hamamatsu Photonics C8484-16C, Инструкция по эксплуатации

Страница: 6 / 53

C8484-16C Instruction manual Ver.1.5
4
2. CHECK THE CONTENTS OF PACKAGE
When you open the package, check that the following items are included before use. If the
contents are incorrect, insufficient, or damaged in any way, contact Hamamatsu subsidiary
or local distributor without attempting to operate the camera.
C8484-16C Camera head 1
C8484-16C Camera control unit 1
Camera head extension cable 1
Lens mount cap * attached to the camera 1
C8484-16C Instruction manual * this booklet 1
<Option>
AC adaptor
Recommendation
article of
Hamamatsu
Camera cable (5 m) A3194-01
CameraLink interface cable A9262-05
Note
• The cable listed in option is highly recommended for use with the camera. The camera
system may not confirm to CE marking regulation if other type of cable is used with.
3. INSTALLATION
Avoid using or storing this camera in the following places
•
Where the ambient temperature might fall below 0

C or rise above 40

C
•
Where the temperature varies extremely
•
In direct sunlight or near a heater
•
Where the humidity is 70 % or more or where there is dripping water
•
Close to a strong source of magnetism or radio waves
•
Where there is vibration
•
Where it might come into contact with corrosive gases (such as chlorine or
fluorine)
•
Where there is a lot of dust