Hamamatsu Photonics C8484-16C, Инструкция по эксплуатации

Страница: 10 / 53

C8484-16C Instruction manual Ver.1.5
8
6. NAME AND FUNCTION OF THE PARTS
6-1 CAMERA HEAD
Figure 6-1
①
Lens mount
C-mount lens or optical system with C-mount can be attached.
Note
• C-mount has a depth of 7 mm. Screwing the lens too far into the
camera head may scratch the glass surface.
② Camera head extension connector
Connector used for connecting the camera head to the camera control unit.
③ Camera mount
Jig for fixing the camera head. Used when mounting the head on a tripod or other fixture.
• When fitting the camera head to a tripod or other fixture, use the
screw (1/4-20UNC) in the center of a camera mount or the threaded
sleeve (M3) about the mount's perimeter. Be careful not to allow the
fitting screw to enter more than 5 mm from the surface of the mount.
Screwing this in excessively may impair normal operation.
[Front]
[Side] [Rear]
① ②
③