Hamamatsu Photonics C8484-16C, Инструкция по эксплуатации

Страница: 24 / 53

C8484-16C Instruction manual Ver.1.5
22
(3) 4×4 binning readout
Exposure and 4

4 binning readout repeat according to the sequence set internally.
Command : AMD N (Free running mode)
Scan mode : SMD S (Binning)
Exposure time : NMD F, FBL n (Frame blanking)
Binning
: SPX 4 (4×4 binning)
1V (vertical) : 28.0 ms
Setting count : 1V to 36V (28.0 ms to 1.00 s ）
Repeat cycle : 35.7 Hz/n
Exposure time can be calculated using the formula below.
Exposure time = n × 28.0 ms
(n=1 to 36)
(4) Sub-array readout
Readout of the sub-array repeats along with frame blanking according to the sequence
set internally with the selection of <
SVO n/SVW m/SPX e
>. The exposure time
(electronic shutter time) is set with the
FBL n
command.
Command : AMD N (Free running mode)
Scan mode : SMD A (Sub-array)
Exposure time : NMD F, FBL n (Frame blanking)
Sub-array
: SVO n / SVW m / SPX e
Exposure time = FBL n
CCD exposure
Readout signal
from CCD chip
Digital data
output
Readout period
Exposure time = FBL n
CCD exposure
Readout signal
from CCD chip
Digital data
output
Readout period