18
13.1.3 Manual configuration of network connection –
wireless (WLAN)
•
To manually configure a network connection, proceed
as follows:
•
Press [ ] (4) to go to the system settings.
•
Use [
NAVIGATE/ENTER/VOLUME
] to navigate to the
"Network" menu item.
•
Confirm the selection by pressing [
NAVIGATE/
ENTER/VOLUME
].
•
Use [
NAVIGATE/ENTER/VOLUME
] to navigate to the
"Manual settings" menu item.
Manual configuration wireless (WLAN) – DHCP enable
•
Select the option
"
Wireless
"
.
•
Selection the option "DHCP enable".
•
In the input screen, enter the whole SSID (network name)
and then confirm with the
OK
button.
•
Now choose the security standard used by the network.
This can be found in the configuration options of your
router or access point.
•
Depending on the encryption used, you may need
to enter the network key before the connection
is established.
Manual configuration wireless (WLAN) – DHCP disable
This method corresponds to configuration with an active
DHCP server (
manual configuration wireless (WLAN) -
DHCP enable
), however you must also enter the network
information such as the IP address, subnet mask, gateway
address and DNS (primary and secondary).
Find this information in the web interface of your router
or access point, or if this information is already correctly
entered, you can confirm the entry. The radio now attempts
to establish the connection.
13.1.4 View settings
This is where you will find all of the key information about
all network connections that the radio is currently using,
or which have been set up, e.g.: MAC address, WLAN
region, DHCP enable / disable, SSID, IP address, subnet
mask, gateway address, DNS (primary/secondary), etc.
•
Press [ ] (4) to go to the system settings.
•
Use [
NAVIGATE/ENTER/VOLUME
] (9) to navigate to
the "Network" menu item.
•
Confirm the selection by pressing [
NAVIGATE/
ENTER/VOLUME
].
•
Use [
NAVIGATE/ENTER/VOLUME
] to navigate to the
"View settings" menu item.
13.1.5 Network profile
The radio automatically saves all successful network
connections (profiles). This means that re-establishing
these connections (for example, after the radio was
disconnected from the power supply) does not require you
to re-enter the network access information.
To remove network profiles individually, proceed as follows:
•
Press [ ] (4) to go to the system settings.
•
Use [
NAVIGATE/ENTER/VOLUME
] (9) to navigate to
the "Network" menu item.
•
Confirm the selection by pressing [
NAVIGATE/
ENTER/VOLUME
].
•
Use [
NAVIGATE/ENTER/VOLUME
] to navigate to the
"Network profile" menu item.
•
Select a network profile and press [
NAVIGATE/
ENTER/DELETE
] to remove it.
•
Confirm the prompt querying if you want to delete
the network profile with
YES
.
•
A profile that is currently active, or that is in use,
cannot be deleted.
Note
•
Before giving or selling the radio to someone else,
we recommend performing a factory reset.
•
This will completely and permanently delete all
network information and connections stored on
the device.
Содержание DIR3020
Страница 3: ...25 1 9 3 5 7 2 4 6 8 10 1 2 3 4 A B...
