16
12. Alarms
The Radio has two individually adjustable alarm times.
12.1 Alarm settings
You can access the alarm settings as follows:
•
Press [ ] (4) to access the Settings menu.
•
Use [
NAVIGATE/ENTER/VOLUME
] (9) to navigate to
the "Main menu" menu item.
•
Confirm the selection by pressing [
NAVIGATE/ENTER/
VOLUME
].
•
Use [
NAVIGATE/ENTER/VOLUME
] to navigate to the
"Alarms" menu item.
Alarm 1 and alarm 2 are configured identically and allow
two separate alarm times to be saved. Choose Alarm
1 or 2 and confirm your selection by pressing [
NAVIGATE/
ENTER/VOLUME
].
Set the following details using [
NAVIGATE/
ENTER/VOLUME
].
Mode:
Choose when the alarm is to activate:
Off – Daily – Once – Weekdays – Weekends
Time:
First choose the hour, then the minute at which the alarm
is to activate.
Mode:
Set whether you wish to be woken by an alarm tone
(
buzzer
), by
DAB
,
FM
or by the
Internet radio
.
Program:
If you selected
Internet radio/ DAB/ FM
, choose which
station you wish to be woken with. You can choose any
of the 30 preset slots or the
Last listened
.
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Saving:
Select
Off / On
to complete your alarm settings.
Note
It is recommended to allow the radio to update the
time automatically. This ensures that the time is always
correct even if there is a separation of power supply –
for example a power cut.
12.2 Activating / deactivating the alarm
•
Confirm the menu item
Save
in alarm settings to activate
the alarm.
•
Disable the alarm by setting the
Mode
to
Off
.
12.3 Stopping the alarm/ Snooze function
•
When the alarm activates, press [ ] to stop the alarm.
•
When the alarm activates, press [
NAVIGATE/ENTER/
VOLUME
] to enable snooze.
•
The alarm turns off for the selected time interval
(5/10 minutes) before activating once again.
13. System settings
You can modify all settings and access important
information about the radio in the System settings.
13.1 Network
13.1.1 Network wizard – Configuration of Internet
connection / Search
The
network wizard
helps you set up a connection
between the radio and the Internet. More methods
of configuration and detailed information are
amplified subsequently.
•
You can start the
Network wizard
as follows:
•
Press [ ] (4) to go to the system settings.
•
Use [
NAVIGATE/ENTER/VOLUME
] (9) to navigate to
the "Network" menu item.
•
Confirm the selection by pressing [
NAVIGATE/
ENTER/VOLUME
].
•
Use [
NAVIGATE/ENTER/VOLUME
] to navigate to the
"Network wizard" menu item.
•
When the wizard is started, the radio searches for
WLAN (WiFi) connections and then shows a list of the
available networks.
•
Turn [
NAVIGATE/ENTER/VOLUME
] to switch amongst
the networks discovered. At the bottom of the list are
options to restart the search ("[Rescan]") or configure the
connection yourself ("[Manual config]").
•
If your network is not found or the SSID (Service Set
Identification, that is, the name of your network) is not
shown, the network may be hidden or out of range.
In this case, try manual configuration.
Содержание DIR3020
Страница 3: ...25 1 9 3 5 7 2 4 6 8 10 1 2 3 4 A B...
