13
4.5.3 Integrating devices in the Hama Smart Solu-
tion app
•
The LED begins to flash blue quickly. If it flashes slowly or
not at all, press the Pairing button for 5 seconds.
•
Open the app and log in.
•
Press
+
in the upper-right corner to add a new device.
•
Select
Sensors
in the list and then select your device.
•
Now confirm that the LED flashes quickly.
•
Next enter your WiFi password and confirm with
OK
.
Your sensor will now be connected.
•
Once the connection has been established, the LED stops
flashing quickly and the app confirms that your sensor
was connected. You can now give it a name.
•
Click
Finish
to complete the process.
•
You can now fit the sensor and then configure it.
4.6 WiFi camera
4.6.1 Product features
Note
•
Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
•
Connect the product only to a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
•
Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
•
Do not continue to operate the device if it becomes
visibly damaged.
•
The product is intended for indoor use only.
•
Keep this product, as all electrical products, out of the
reach of children!
