MAN1544-5
26
5.3
Program
Note:
From the Zones Menu use the
Move Right key to advance through the
PROGRAM
Menu
.
Pressing Enter to access the Program Menu will again disable the panel and the LED’s will illuminate as they
did in the Systems Menu.
The
PROGRAM
Menu consists of;
Zones
Clock
MCP Zone
Outputs
Relays
Fire Fan
Agent
Sounders
Indicate
Display
Zone Labels
EOL
Zone S/C
5.3.1
Zones
Press
and the Zones Menu will be displayed on the LCD screen. Pressing
again will access the
Zones sub menu where first the
Move Right and
Move Left keys are used to select the Zone
number and the
Move Up and
ZONE 2
NORMAL
ZONE 4
AVF
ZONE 6
AGENT 1
Figure 13: Sample Zone Screens
Move Down keys are used to set the functions within that Zone. The functions are;
Normal
Normal is selected if the Zone is required to initiate an alarm and latch until reset.
AVF
If AVF, ( Alarm Verification Facility ) is set active a delay and re-sampling period is initiated to confirm an
alarm condition actually exists on that Zone.
Non Latch
Non Latch if set will initiate an alarm only when the Zone is in alarm.
SRESET 60
Resets the Zone 60 seconds after the Zone comes out of alarm.
Agent 1
Agent 2
Agent 3
Agent 4
If only one trigger zone is allocated a zone then the system will be activated by one zone only.
