Hali-Brite SPS Series, Руководство по установке и обслуживанию

Страница: 10 / 26

10
SPS Installation and Maintenance Manual
4 Installation
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
4.1 Unpacking
Handle the equipment very carefully to prevent component damage. Note any
exterior damage to the carton/crate that might lead to detection of equipment
damage. If you note any damage to any equipment, file a claim with the carrier
immediately. The carrier may need to inspect the equipment. A typical shipping
crate (including an L-806 wind cone) is shown below:
Figure 1
Note: To prevent damage to the equipment, transport the pallet to the
installation site before removing the SPS components from the pallet. The
anchor assembly may be removed earlier for preparing the mounting base.
4.2 Tools and Supplies Needed
Equipment Required But Not Supplied
Wrenches
Set of Screwdrivers
Set of Pliers