Halcyon TRAVELER, Руководство пользователя

Страница: 13 / 36

the crotch strap; you may remove this if you choose.
• BC Storage Pad: Undo the bottom bolts to allow access to the pocket if storing a lift
device in the backplate storage pad.
• BC Shoulder Pads: Adjustment of pad placement is done by moving the velcro tabs up
or down in the corresponding slots on the pad then attaching the tabs around the
harness.
•
Diving Double Cylinders: You may need to use the Cinch Bolt Extender on the lower tank
band bolt. We suggest you check this when you first set up your Cinch assembly to your
backplate if using double cylinders. We do not suggest using the Bolt Extender on the
top tank band or if you are not diving a Cinch assembly.
A triglide may be put into place to act as a sizing guide to prevent over tightening the harness.
Figure 9 shows the optional triglide placement to prevent over tightening. On the right, in Figure
10 is pictured without.
Complete instructions on installation and sizing of the Cinch and quick-adjust crotch strap can
be found at the end of this Cinch manual section.
HALCYON CINCH COMPONENTS (see image on the following page to match up items with
numbers)
1.
Cinch Adapter Plate - High-quality, molded ABS plate is uniquely designed to fit the
contours of your Halcyon backplate, providing unprecedented adjustability without the
risk of quick-release buckles or the hassle of dangling webbing.
2. D-Ring Assembly - Allows the secure harness webbing to slide freely without affecting
the position of the left-hip D-ring.
3. Doubles Bolt Extender - Extends a short bottom bolt, allowing the Cinch System to fit a
variety of double tanks. Available in metric (5mm) or imperial (5 16/18).
4. Bolts Kit - Comes with four (two 1/4 - 20 by 3/8, two 1/4 - 20 by 5/8) SS bolts with weld
Figure 6 Figure 7 Figure 8
Figure 9 Figure 10
13
HALCYON.NET