Halcyon TRAVELER, Руководство пользователя

Страница: 15 / 36

If you are upgrading to the Cinch, it is important that you start with new harness webbing when
retrofitting the Halcyon Cinch to an older backplate. New webbing allows the Cinch to slide free-
ly whereas old webbing will catch at the indents left from previous triglide/D-ring placement.
• Remove all webbing accessories starting with the waist belt, including the SS waist
buckle, left D-ring/triglide, ACB weight pockets, and knife sheath.
• Remove the triglides from behind the plate and pull the webbing through the lower back
plate slots.
• Finish removing the webbing from the top slots after removing the D-rings.
• Start with a new set of webbing that is free from indents or blemishes.
• Align the Cinch plate assembly to the backplate and attach it using the provided bolts.
The Light Retainer Fixture attaches using the right bolt, which also holds the Cinch to
your backplate. If using the the light fixture, secure the left (3/8”) bolt first. You can
insert the right bolt when installing the light fixture. If you are not using the light fixture,
you may secure both bolts (3/8”) at this time (figure 11 & 12).
ATTACHING THE D-RING (LEFT) AND LIGHT RETAINER ASSEMBLY (RIGHT)
The D-ring and light-retainer assemblies allow you to adjust your webbing freely without affect-
ing the position of the light and/or D-ring.
Left (as worn by the diver): You will be using the left, outermost slot of the Cinch plate to at-
tach the d-ring fixture. Thread the webbing of the D-ring through the outer Cinch slot and then
through both sections of the triglide. Adjust length as desired. After the waist band is assem-
bled, feed the waist belt through the slot on the D-ring holder (figure 13 &14).
Right (as worn by the diver): If you are using a waist mounted light canister, it is necessary to
attach the light retainer assembly. In this case you will be using the right, outermost slot on the
Cinch to secure the light assembly. The same bolt secures both the assembly piece and the
Cinch plate.
INSTALLING
THE CINCH SYSTEM
Figure 11 Figure 12
15
HALCYON.NET