HAKO Scrubmaster B260 R, Сервисная книжка

Страница: 63 / 121

Slide 63
7. Mechanical components
Adjusting the sealing strips / inclination
The correct inclination adjustment is decisive for:
• ensuring that the sealing strips of the squeegee are lying evenly on the ground over their contact
surface
• ensuring that the squeegee runs quietly and evenly during the suction process.
1.Place the machine on a level surface and lower the squeegee using the squeegee key
figure 7.2b -46.
2. Loosen the lock nuts (figure 7.2a-A) and adjust the squeegee by turning the adjusting bushing
(figure 7.2a-B) so that the ends of the sealing strips are just about touching the ground.
Turning the adjusting bushing clockwise:
The distance between the sealing strip and the ground increases at the ends figure 7.2a.
Turning the adjusting bushing counter-clockwise:
The distance between the sealing strip and the ground decreases at the ends figure 7.2b.
3. Turn on the machine and check the suction pattern. When driving, the sealing strips must be turn
over evenly everywhere (centre and outside).
4. Tighten the lock nuts.
7.1 Squeegee