HAKO 7580.02, Сервисная книжка

Страница: 23 / 116

Foil 23
3.1 Check And Set
Machine Type
1. Make sure to have the correct machine type set. Use the Dip switch A on the
control electronics for setting (see foil 22)
2. For the B1100 machine, the bars no. 1, 2, 4 are to set in bottom and the bar no. 3 in
top position. This setting is a prerequisite for display of the cipher 4.
For the B1100 PB1230 machine, the bars no. 2, 3, 4 are to set in top and the bar 1
in bottom position. This setting is a prerequisite for display of the cipher 14.
For the B1050 machine, the bar no. 3 is to set in bottom and the bars 1, 2 and 4 in
top position. This setting is a prerequisite for display of the cipher 11.
For the B1050 TB 1230 machine, the bar no. 2 is to set in bottom and the bars
1, 3 and 4 in top position. This setting is a prerequisite for display of the cipher 13.
3. If other ciphers appear, modify combination at the Dip switch.
B 1100 1: OFF
B 1100 1: OFF B 1050 1: ON B 1050 1: ON
2: OFF PB1230 2: ON PB / CB 2: ON PB 1230 2: OFF
3: ON 3: ON 3: OFF 3: ON
4: OFF 4: ON 4: ON 4: ON