4. INITIAL SETUP
3
●
Attach the sensor that comes with the equipment.
1.
Press the slide button. The slide pin will move toward the terminal.
2.
With the slide pin moved toward the terminal, attach the sensor.
3.
When attaching the sensor, fit the red-marked side to the red-indicated terminal and the
blue-marked side to the blue-indicated terminal.
A. Preparation of the HAKKO FG-102 side
Slide pin
Slide button
Sensor
terminals
CAUTION
Since the sensor is made of a very thin
(φ0.2)
copper-clad aluminum wire,
any hard press on it may break the wire. Be careful when handling it.
Attach the sensor
●
Set the batteries.
Put six pieces of size AA batteries in the battery box.
CAUTION
・
Make sure the polarity.
・
Avoid any mixed use of new and old batteries.
・
While NiCad and nickel metal hydride rechargeable batteries may be used, they last shorter heat
generation and(or) liquid spill. Use of alkaline batteries is recommended than NiCad batteries.
・
When replacing the batteries, the data saved on the main body will not be lost.
Cover
Battery
