19
M’ ment Number
* * *
F. M’ment number MODE
Pressing the button again causes the transition to the M'ment number mode.
In this mode, the screen displays the temperature measurement rounds conducted in the
measurement mode and recording mode.
In the measurement mode, the count will add up if the iron tip is kept in contact for a long time.
It is recommended to use it as a guide for the replacement of the sensor.
G. Group ID List MODE
Pressing the button again causes the transition to the Group ID List mode.
This mode is intended for viewing the unit ID registered for the group.
1. Gp selection screen
2. Using the or button, select a group No.
3. Press the button to determine.
By the above action, the unit ID’ registered for a particular group will be displayed.
Scroll the data by using the or button. If there is no unit ID registered for the designated
group, nothing will be displayed. Pressing the button on the GpID display screen will bring you
back to the GpNo selection screen.
This mode is possible transfer of the Unit ID data to the PC.
（
Refer to P29 6. SAVING DATA ON THE PC
）
Fig.24 Display of cumulative measurement rounds
Fig.25 Gp selection screen
Group ID List
G r o u p : * *
Gp
：
**
00001
00003
00005
00010
00011
00012
Fig.26 GpID display screen
