15
R
H
001
Temp
Gp
Meas
ID
U n i t
ID
xx
00001
00001
250
℃
Date
2014／08／31／14：01
■
MAXHOLD function
Pressing the button causes “H” icon to appear on the lower right corner of the screen. In that state,
the maximum temperature will be always displayed.
・
When short-pressed (for less than 2 seconds)
While, in the MAXHOLD state, the screen always shows the MAX temperature alone, once the button
is pressed for a short time, the indicated value will be reset once and the new MAX temperature after
the press of the button will be shown thereafter.
・
When long-pressed (for 2 seconds or over)
The MAXHOLD function will be released and the screen will return to the normal display.
（
“H” icon will not be shown any more.
）
NOTE：
If there is no update of the temperature, or when 30 seconds elapse since the button has
been last pressed, the function will be automatically released.
B. Recording MODE
The unit ID scan or pressing the button in the measurement mode causes the transition to
this mode.
* The recorded data is possible to transfer to the PC.
（
Refer to P29 “6. SAVING DATA ON THE PC”
）
●
Recording procedure
1. Scan the unit ID by a barcode reader. This operation conducted in the measurement mode
automatically causes the transition to the recording mode. The read ID will be shown in the
Unit field. In the case where the group is set, the registered group No. will be displayed.
If it is not registered in any group, “--” will be shown.
2. Scan the measurer’s ID by a barcode reader. The read ID is shown in the space of Meas.
In the case where the measurer ID has been once read, you can skip this operation and
move on to the temperature measurement. In that case, the Meas field will automatically
show an ID that was read last.
Recording mode screen
Unit ID display
Measurer ID display
Group No. display
Temperature display
MODE display
