Haiyang HIS-70R Скачать руководство пользователя

Страница: 51 / 58

- 51 -

GPS

The installation of the GPS ANT.

The GPS ANT must be installed at the highest area of the boat and the easiest place to catch the

signal from the satellites. If there are obstacles around the GPS ANT, it isn't able to catch all signals.

The receiving time would be longer or the receiving power would be weaker. Please, follow the

instruction for your installation.

1. Keep from a metal.

2. Over 4m away from a MF/HF ANT, VHF or HF whip ANT.

3. Over 1.5m upper away from MF/HF ANT.

4. Over 1m away from a receiving ANT.

5. Don't put the GPS ANT into the range of radar's beam. (Range: 30

°～

)

6. Over 1m away from the scanner of the radar.

7. Over 5m away from the ANT of the inmarsat.

8. Over 3m away form the ANT of the roof.

9. Over 2m away from the engine.

10. Over 0.5m away from the metal surface.

※

Warning: Not less than 0.5m away from the metal surface.

If the environment can't be satisfied from 1 to 10, have NO. 10 satisfied and consider the others.

Содержание HIS-70R



























































Результаты поиска

Содержание HIS-70R

Отзывы:

Похожие инструкции для HIS-70R

Бренды по названию

Популярные бренды

Haiyang HIS-70R, Руководство пользователя

Результаты поиска

Содержание HIS-70R

Отзывы:

Похожие инструкции для HIS-70R

Бренды по названию

Популярные бренды