Initial Setup
Stingray
2 User’s Guide, v6.0, Issue 01
21
7.
To configure a static IP Address for the STB, on the Network Settings page select
Static.
a. On the Static Network Settings page, type in the new IP Address, Subnet Mask,
Gateway Address, and DNS Server 1 and 2 addresses (as required for your sys-
tem).
b. Select Accept Changes.
c. When prompted, enter the write password (factory default 1234).
d. On the Settings options page, select Reboot.
The network changes take effect upon reboot.
8.
When you have completed the setup, select Exit.
The boot process will continue with the chosen options.
