Stingray
2 User’s Guide, v6.0, Issue 01
13
Connecting the Stingray
2
To connect the Stingray
2:
1.
Connect the “PRIMARY” RJ45 Ethernet port to your network using a Cat5 STP cable
(not included).
2.
(Optional) Connect the “SECONDARY” Ethernet port to the Ethernet port on a PC
(i.e., to connect the PC to the network using the Stingray
2 as a pass-through).
By default, the SECONDARY port works automatically when plugged in; however, it
can be disabled as a configuration option by your service provider (by editing the
STBImage profile).
NOTE
The Stingray
2 has a built-in hardware Ethernet switch to manage traffic for both
the PRIMARY and SECONDARY ports.
Figure
3
Back Panel Connectors
DC power
Ethernet
(10/100 BASE-TX)
HDMI Composite
Video
Audio L+R
DC cable lock hook
Component (Y,Pb,Pr)
Kensington lock hole
SPDIF
[N/S]
RS-232C
[N/S]
IR OUT
[N/S]
