Initial Setup
Stingray
2 User’s Guide, v6.0, Issue 01
18
1.
To interrupt the bootup process, click the Up ARROW on the remote control.
NOTE
You can interrupt the bootup process up until the third icon is lit, indicating that the
STB has located an available provisioning server.
2.
When prompted, enter your password.
The STB is typically shipped with no “read” password set; the default “write” pass-
word is
1234
.
3.
On the Settings options menu, select the item to configure.
For example, you can select an existing “realm” which the STB will “autodiscover”
upon bootup, or you can manually enter the IP address of the device to which the STB
will connect.
TIP
The default realm is VFServer.
