– 32 –
Model GDP615H features a new pocket handle
design and has top controls and a hybrid inner
door.
The new pocket handle is attached to the outer
door panel with seven 1/4-inch hex-head screws.
To remove the handle, remove and separate the
door. Remove seven 1/4-inch hex-head screws.
The handle can be removed toward the inside of
the panel.
Shown below are all the components for the
GDP615H pocket handle.
The pocket handle is attached to the inner
door panel. The front control console must
be removed as previously described in
Front
Control Console Removal
(in this section).
Remove six 1/4-inch hex-head screws.
The pocket handle is clipped to the plastic inner
door and on the adapter of the SS inner doors.
