Hagie STS14, Руководство оператора

Страница: 69 / 127

4.46
IV.
OPERATING SYSTEMS
E. OPERATING THE QUICK-ATTACH SYSTEM
PULL INTO THE ATTACHMENT
– Slowly pull into the boom.
A helpful tip to pulling into the boom: use your speed control. Set the speed control to the slowest speed
and control it from there rather than trying to control it with the hydrostatic lever. (See page 4.18 on the opera-
tion of the speed control)
ARE THE HOOKS HIGH ENOUGH?
- Check to see that
the quick attach hooks are high enough to clear the lock pins (fig.
4.46-1). Due to soil settling or the difference in the airbag pressure
without the boom on, you may need to let some air out of the air-
bags using the relief valves. If your machine is not equipped with
the valves, you will need to call Hagie Customer Service and pur-
chase airbag relief valve kits and install them on the front leg as-
semblies.
Once you have made any necessary adjustments you can
continue to drive into the boom until the hooks are above the lock
pins.
RECONNECT ALL HYDRAULIC, ELECTRICAL, SOLUTION, AND FOAMER (if equipped)
LINES
– Reconnect all the necessary lines between the ma-
chine and the boom. If connecting to another attachment other
than the boom, make sure that you read the operator and
parts manual for the attachment and understand how to con-
nect it.
FIG. 4.46-2
FIG. 4.46-1
Turn the engine OFF before disconnecting
any hoses or electrical lines! Failure to do so
may result in serious injury or death.