Hagie STS14, Руководство оператора

Страница: 54 / 127

IV.
OPERATING SYSTEMS
4.31
D. SPRAY SYSTEMS
SOLUTION TANK–
The stainless steel tank (fig. 4.31-1),
is 1400 gallon capacity. The tank has a sparge type agitation
system.
FIG. 4.31-1
SOLUTION TANK VALVE–
The solution tank valve (fig. 4.31-2,
item A) controls the amount of solution coming out of the tank. The valve
is controlled from inside the cab with
the TANK VALVE switch (fig. 4.31-3)
located on the right hand console.
TANK SUMP VALVE–
The
tank sump valve (fig. 4.31-2, item B)
is a ball type valve that has to be turned on and off manually. This valve is
to allow the fluid into the tank from the fill option.
FIG 4.31-2
B
A
FIG 4.31-3
SOLUTION PUMP–
The solution pump (fig. 4.31-4) is a centrifugal type hydraulic pump that is con-
trolled by the Pulse Width Modulated Valve (fig. 4.31-5) and the Raven console (fig. 4.31-6). The pump draws
the solution out of the tank at a rate determined during the calibration of the Raven console. It dispenses it
through the many valves and hoses that make up the spray system. The pump is also used for the agitation
system and the rinse sys-
tem.
FIG. 4.31-4
FIG. 4.31-5
FIG. 4.31-6