Form No. 3413-793 Rev B
Stump Grinder Fit-Up Kit
TX 1000 Compact Tool Carrier
Model No. 23172
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California
to cause cancer, birth defects, or reproductive harm.
Note:
Determine the left and right sides of the machine from the normal operating position.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Right shield bracket
1
Left shield bracket
1
Bolt (1/4 x 3/4 inch)
4
2
Locknut (1/4 inch)
4
Install the shield brackets.
Shield support
2
Shield
1
Bolt (1/4 x 1-1/2 inch)
8
Washer
8
3
Locknut (1/4 inch)
8
Assemble the operator shield.
4
Quick-attach assembly
1
Replace the quick-attach assembly.
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3413-793* B
