TX100 USB
49
6T7639a
Screen
/ Menu / Instal. Management:
9.2.1 Resetting an installation to its factory condition
Screen
/ Menu / Instal. Management / Reset
9.2.2 Coupler selection
Screen
/ Menu / Instal. Management / Coupler selection:
9.2.3 Updating an installation
Screen
/ Menu / Instal. Management / Installation update:
9.2 Installation management
This screen gives acces to the following items:
-
Reset
: allows resetting all products of the installation into their factory condition.
-
Coupler selection
: allows assigning any coupler to the installation.
-
Installation update
: allows deleting from the project files the products which are
not used in the current installation.
-
Information
: gives information about the installation.
-
Download)
: allows starting or resuming a download for all products of the installa-
tion.
-
Delete links
: allows removing all links from the installation.
-
Learn Installation
: allows re-learning an installation.
This function allows deleting all RF bidirectional and TP products from the installation.
These products are reset to their factory condition. Unidirectional products must be
deleted individually. (See. Reset (product)).
• Press the YES screen key to confirm the reset.
• Press the NO screen key to return to the previous screen.
This function allows selecting a media coupler in an installation.
• Select the media coupler to be used by pressing its
button until the red indicator
turns on (4 sec).
• Release the button.
A Download wait screen is displayed for some seconds. A sound signal is emitted when
the selection is done.
If the bar of the Download wait screen blinks, the coupler is outside of the radio
range, you must go closer to the coupler.
!
The key
allows you to return to the previous screen.
This function allows erasing from the project file the products which were detected, but
not linked.
The number of products without link is displayed.
• Press the YES screen key to carry out the update.
• Press the NO screen key to return to the previous screen.
