TX100 USB
20
6T7639a
After learning the installation and numbering the inputs and the outputs, the following operations are required:
• Assign functions to the inputs.
• Create links between the inputs and the outputs.
These two operations can be performed both in On-line and Off-line mode:
-
In On-line mode, the configuration is downloaded as the functions are assigned to the inputs and the links are created: the
installation may be tested at each step of the configuration in Auto mode.
-
In Off-line mode, the functions are assigned to the inputs and the links are created only in the TX100, without connection
with the installation. All functions assigned and links created are then downloaded together to the installation, in one single
operation, at the end of the configuration or when switching to On-line mode: the configuration is globally faster.
To select the On-line or Off-line mode, press the menu key
of the keypad or the "Menu access" key located on the right
side of the TX100. Select the following menu:
Screen
Menu / Settings / On-line / Off-line:
4. Choice of the On-line or Off-line configuration mode
• Press the
or
key to select On-line / Off-line
• Press the
key to confirm your selection.
The
key allows you to return to the previous screen.
The On-line mode is active by default.
• Press the YES screen key to activate the Off-line mode.
• Press the NO screen key to remain in On-line mode.
In Prog mode, the Off-line mode is symbolized in the title bar by two white lines
separating the PROG title from the two inputs / outputs arrow symbols.
To switch back to On-line mode, return to the Settings menu (Menu / Settings / Online /
Offline) and activate the On-line mode.
