22
OPERATION
Stop’n go function “II”
Bridge function
Stop’n go function acts like a pause. The Stop’n go function simultaneously suspends op-
eration of all cooking zones and then resumes at the heat settings that were previously set.
In order to activate the Stop’n go function, at least one cooking zone must be in use. Next,
touch the Stop’n go function sensor field (7). “II” will be shown on all cooking zone displays
(3). When a cooking zone is still hot, the “II” symbol will alternate between “H” and “h” indi
-
cating residual heat in a given cooking zone.
To deactivate the Stop’n go function touch the (7) sensor field again. Cooking zone dis
-
plays (3) will show the heat setting that was previously set before activation of the Stop’n
go function.
Now both cooking zones can be controlled at the same time.
Now both cooking zones can be controlled independently.
•
Touch sensor (3) to select the cooking zone, then touch Keep Warm function sensor
field (8) and the display will show the symbol indicating that temperature of 42•
o
•C is
selected,
•
Touch Keep Warm function sensor field (8) again and the second symbol will be shown
indicating that temperature of 70•
o
•C is selected,
•
•Touch Keep Warm function sensor field (8) again and the third symbol will be shown
indicating that temperature of 94••
o
C is selected,
•
•To turn off the Keep Warm function at any time touch sensor (3), and then slide across
the sensor (2) to reduce heat setting to •0” .
The Bridge function allows pairing of two cooking zones into a single combined cooking
zone. The Bridge function is very convenient, especially when cooking in large pots such
as a baking pan.
The two left or two right cooking zones can be bridged.
In order to activate the Bridge function touch sensor of the cooking zone (3) and then si
-
multaneously touch two sensors of the cooking zone (3) on the left or right side. The rear
cooking zone display will show , while the front cooking zone display will show “0”. The
desired heat setting is selected by sliding your finger across the setting selection sensor
field (2).
In order to deactivate the Bridge function touch and hold sensor of the cooking zone (3)
with symbol for 3 seconds. The respective cooking zone displays will show “0”.
Содержание HC-I604D
