Hafco Metalmaster S829, Инструкция и каталог запасных частей

Страница: 18 / 31

17
10.3 Monthly Maintenance
Check that all screws on the motor, the pump, the vise jaws, and the guard are tight and secure.
Check that the guard is free from defect.
Grease the hinge pin for the head assembly.
10.4 Six-Monthly Maintenance
Change the oil in the reduction unit using oil type DN SUPER GEAR 460 by IDEMITSU or DAPHON
or equivalent oil, proceeding as follows:
Remove the connecting plug from the electric box and unscrew
the control handle.
Drain off the old oil from the drain hole (B )
Pour in new oil of to the mark (A), through the hole for the control
handle, keeping head in a horizontal position.
Full the oil up at least 1.5 liters.
Reassemble all the parts.
Check continuity of the equipotential protection circuit.
10.5 Oils for Lubricating Coolant
Considering the vast range of products on the market, the user can choose the one most suited to his
own requirements, using as reference the type SHELL LUTEM OIL ECO.
THE MINIMUM PERCENTAGE OF OIL DILUTED IN WATER IS 8~10%.
10.6 Oil Disposal
Oil products must be disposed in a proper manner following local regulations. Please refer to
“Machine disposal.”
10.7 Special Maintenance
Special maintenance operations must be carried out by skilled personnel. However, we advise
contacting dealer and/or importer the term special maintenance also covers the resetting of protection
and safety equipment and devices.
B
A