Haes AOV Series, Инструкция по установке, пусконаладке и эксплуатации

Страница: 4 / 36

AOV Installation, Commissioning & Operating Manual Approved Document Ref: UI-AOV-01 Issue 7.0
2
ABOUT THIS PANEL
PRODUCT OVERVIEW
AOV is a range of single area Automatic Opening Vent control panels. The panels are available with three
different output capabilities, 3 Amp, 5 Amp & 10 Amp for controlling small, medium or larger loads.
The panels are supplied in two different enclosure sizes with the 3 Amp version in a smaller cabinet with
space for 3.2Ah batteries and the 5 & 10 Amp versions in a larger cabinet with space for 12Ah batteries.
Standard & high spec versions are available with the high spec version including additional control inputs
and outputs. See product codes and features table.
All variations are supplied in a sheet steel enclosure suitable for wall mounting with a hinged, lockable front
access door. The panels can be semi recessed using a suitable recessing bezel. Cable entry is via 20mm
knockouts located at the top and rear of the cabinet.
Different key types are used for the door lock and the ‘activate controls’ key switch. It is also possible
to enable the controls via a 4 digit code entry, if preferred. An eight button keypad is used to control the
system and allow access to the function options. The three main buttons, ‘OPEN VENT’ (red), ‘CLOSE
VENT’ (blue) & ‘RESET’ (green) being much larger and colour coded to assist the end users.
The panels are designed to control 24vdc motorised vents which use a polarity reversal to control direction.
A 1 Amp output is also provided for the control of magnetic vents or other purposes.