PowerSmoke 740 (HV) Operating Instructions
Version 2.0
The
PowerSmoke 740 HV
has an integrated valve and can therefore
be even positioned lower than the tank.
Flow direction is marked by an arrow. The "R" marked connector
(swing fixture) is to be routed back to the tank. Back flow is approx.
35ml/min. In order not to install a separate connector to the tank, a
delivered T-piece can be looped into the tanking hose. Here, the back
flow is to be connected.
Hints for the filtering pendulum:
Flow rates of many pendulums in the market are to low (especially
sinter and felt pendulums). We recommend pendulums from our
accessories store which have low flow resistance besides good filtering
capabilities.
Use filtering pendulums when ever possible; you don't need additional
filters in the suction hose (there is no filter necessary in the pressure
line anyway).
Pay attention not to contaminate the hoses when connecting the
suction hose and pendulum hose. Possibly clean the hoses and the
pendulum using pressurized air prior to installation.
Page 10 of 27