PowerSmoke 740 (HV) Operating Instructions
Version 2.0
9.2. Magnetically Valve
A very comfortable possibility is to loop in a magnetically valve into the
pressure line. The pump electronics of the
PowerSmoke 740 (HV)
allows for such a valve to be connected and controlled. Theoretically
any magnetically valve with 5 volts and a maximum of 300mA current
can be connected. Such a magnetically valve must have a sufficient
wide diameter though; otherwise the pump motor or electronics might
be over loaded. Fitting valves are available as accessories in our shop.
Valves with 3-wire connection cables usually are only wired with brown
(minus) and red (plus). Under no circumstances use valves which
possess their own electronics.
Page 24 of 27