Hacker PowerSmoke 740 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 27

Hacker PowerSmoke 740 Скачать руководство пользователя страница 4

PowerSmoke 740 (HV) Operating Instructions

Version 2.0

1. General

With this

PowerSmoke 740 (HV)

you purchased a high grade

accessory for your model airplane.

PowerSmoke

pumps are the most

innovative and most high grade pumps with significant advantages
over other systems on the market.

Best flow rate and optimal flow pressure at any time thanks to high
precision metal toothed wheels, highest manufacturing quality and
electronics optimized into the ultimate detail and totally manufactured
in Germany – providing untroubled fun for an extraordinary hobby!

As with its predecessor, the PowerSmoke 600, it is possible to connect
an electrical back pressure valve which is controlled by the pump
electronics. We offer appropriate magnetically valves in our accessory
program.

The

PowerSmoke 740 HV

("HV" stands for Head Valve) integrates a

back pressure valve. This is unique in the fields of smoke pumps! This
back pressure valve makes the pump 100% leak proof and does not
allow leaking for unwanted smoke oil to pass – to benefit the
environment and your model!

Please read these instructions carefully. We do not assume liability for
damages caused by ignoring the operating instructions, as well as for
damages caused by operating the

PowerSmoke 740 (HV).

The

allowable usage of the

PowerSmoke

pumps is solely limited to smoke

oil flow in unmanned airplanes.

Hint:

PowerSmoke pumps are not applicable for Bio-Diesel! Be careful with smoke oils
including additives (aroma add-ons). Please read chapter 8!

Page 4 of 27

«
...
2
3
4
5
6
...
»

Содержание PowerSmoke 740




























Отзывы:

Нет отзывов