Hach AquaTrend 51200, Инструкция по эксплуатации инструмента

Страница: 58 / 94

Page 58
Portable AquaTrend Interface Installation and Mounting
51350-18 Hardware Installation.fm
Section 5
The Portable AquaTrend Interface can be easily connected to a sensor by
plugging the cord jack on the Portable AquaTrend Interface into the receptacle
provided on the sensor. See
Figure 18 .
Figure 18 Attaching Portable AquaTrend Interface to Sensor
The Portable AquaTrend Interface’s mounting kit provides an easy way to
mount the device to a wall or pole. See
Figure 19 and Figure 20 and the
instructions which follow.
For wall mounting:
1. Use the bracket as a template to mark positions on the wall for four of the
eight screw holes – either the vertical or horizontal pair.
2. Drill the marked positions for four ¼-20 screws.
3. Use four ¼-20 hex-head or pan-head screws to secure the bracket to the
wall (10 in-lb (1.1 n-m) maximum).
4. Fit the bracket lip into the slot on the back of the Portable AquaTrend
Interface and push down until the device fits securely in the bracket.