Habasit Rossi A Series, Руководство по эксплуатации

Страница: 78 / 120

78
UTD.123.2019-10.00_EN
15 - Mounting positions, oil quantity and position of plugs
For inclined mounting positions, when "spec." is stated on nameplate in IM field, refer to the attached
specific documentation.
15.1 - Oil (quantity) levels for worm GEAR REDUCERS and GEARMOTORS sizes 32 ... 81
(A series), supplied FILLED with OIL
Before commissioning, use a dipstick and check that the vertical distance X [mm]
between plug shoulder
and oil level corresponds to the value stated in the table 13.1.1.
Before checking ensure that there are no more gas pockets in the oil which is included in the gear reducer.
Measure as specified in fig. 13.1.1 with gear reducer in mounting position B7.
Tab. 13.1.1 - Oil level (dimension x) and quantity for gear reducers and gearmotors A series sizes 32 ... 81
Size
Train of gears
Mounting position
Oil level (dimension x
1)
) [mm] and quantity [l]
V IV 2IV
B3, V5, V6 B6, B7 B8 B3, V5, V6 B6, B7 B8 B3, V5, V6 B6, B7 B8
mm l mm l mm l mm l mm l mm l mm l mm l mm l
32 34
0.15
25
0.2
34
0.16
42
0.2
25
0.25
42
0.2
–
–
–
–
–
–
40 34
0.26
24
0.35
34
0.26
43
0.32
24
0.4
43
0.32
43
0.42
24
0.5
43
0.42
50 52
0.4
26.5
0.6
52
0.4
48
0.5
22
0.7
48
0.5
48
0.6
22
0.8
48
0.6
63, 64 59
0.8
30
1.15
59
0.8
58
1
30
1.3
58
1
58
1.2
30
1.55
58
1.2
80, 81
89
1.3
37
2.2
63
1.7
96
1.5
37
2.5
50
2
B3 : 96
V5
: 89
V6 : 89
1.7
1.8
1.8
37
2.8
50
2.3
1) Tolerance of dimension x:
±
2 mm.
Fig. 13.1.1 - Position the gear reducer or gearmotor, mounting
position B7 for the measurement of oil level
(quantity).