Operating instructions 36001
Hot-pressing device
PT-55
Page 15 of
19
Edition: 04/0401
Subject to alterations
9. Accessories
9.1
Guide rails, clamps
These
accessories are supportive in order to obtain good Thermofix joints. Width and number of
necessary guide rails depend upon the belt width and the requirements of the machine or device.
After placing the belt ends in the appropriate guide rail with fixed width
→
Ill. (5) and locking with the
covering plate, the two clamps are mounted in the angle to ensure that the belt cannot be moved
during the hot-pressing process.
Place the guide rail exactly in the center of the hot-pressing device and then close the device.
→
Ill. (6). This guarantees a uniform distribution of heat over the rail and the joint.
Illustration 5
Illustration 6
