Habasit PM-1056/160, Общее руководство по использованию и техническому обслуживанию

Страница: 34 / 82

Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Use Manual
Hot Press PM-1056/160
Author: A.T.
INSTALLATION
Edition: 09/2004
Page
C-3
Replaces:
Hot Press type PM-1056/160
SECTION C.2 PACKING AND HANDLING
Section. C.2.1 F
IRST DELIVERY
/ FIXED OPERATION
USE
ATTENTION
The movement of the packaging and machinery should be carried out by authorized
operators.
Suitable equipment must be used to move the machinery, with adequate strength to deal
with the weight and bulk of the press.
When unpacking, check that no small parts remain in the case, and carefully check the
general conditions.
In transit, or on being moved, the press must be disconnected from any control or regulating
units.
There are two handles at the side of the press for lifting the equipment (3). The fastening
rods at each end of the press must be evenly locked before hoisting.
Never use any hooking points other than the specific (3) eyebolts when hoisting the press.
The fastening rods (4) must be correctly closed
IMPORTANT
REPORT ANY DAMAGE NOTED ON THE MACHINE AT DELIVERY TO THE CARRIER AND
SUPPLIER.
Packing materials (wood, nails, plastic, barrier bags, etc.) can be sources of danger and
should be placed in collection points, especially if polluted or non-biodegradable.
The user must observe the waste disposal legislation in the country of installation when
disposing of the packaging.
ATTENTION
ALL HANDLING OPERATIONS OF THE PRESS MUST BE PERFORMED SLOWLY WITHOUT ANY
SUDDEN MOVEMENTS, TO AVOID DAMAGING PERSONS AND THINGS.