Habasit PM-1056/160 Скачать руководство пользователя страница 12

Страница: 12 / 82

Habasit Italiana S.p.A.

Vittorio Veneto 31029 (TV)

Tel.: ++39(0)438.9113

Fax. ++39(0)438.200545

Use Manual

Hot Press PM-1056/160

Author:

A.T.

REGULATIONS AND GENERAL WARNING NOTES

Edition:

09/2004

Page

A-4

Replaces:

Hot Press type PM-1056/160

SECTION A.3

USE CRITERIA

HABASIT requests the Customer to fully read this manual on delivery of the machine it

accompanies, and always before attempting any action on the machine. This manual is

arranged to supply all the instructions, indications and warnings the user may need in order

to know the machine, understand its operating principles, and to be adequately informed to

ensure safe use.

In addition to the instructions in this manual, we would ask users to observe any specific

current laws.

This manual must be considered as an essential part of the machine. It contents must be

made known to the entrusted maintenance persons and users.

The purpose is to provide all the information required for good, correct use of the machine.

The manuals must be kept throughout the machine’s life and must be updated in the event of

modifications aimed at improving the machine’s performance.

The manuals must be available to qualified personnel.

Consultation of this manual is facilitated by the general index on the first page, which makes

it possible to immediately find the subject of interest.

If the subject dealt with is particularly important it is highlighted with references to the type of

technical personnel required to intervene.

All updates HABASIT considers necessary to improve the quality of the machine will be

communicated by way of sending of further specific documentation or a new manual to

replace the previous one.

If the machine is sold to another customer, the manuals must accompany the machine and

the new customer must be notified to HABASIT for any future modifications and updates.

A copy of this manual, delivered with the machine, is meant for the maintenance operators,

who shall read and keep it near the machine, and consult it before undertaking any action on

the machine.

Содержание PM-1056/160



















































































Результаты поиска

Содержание PM-1056/160

Отзывы:

Похожие инструкции для PM-1056/160

Бренды по названию

Популярные бренды

Habasit PM-1056/160, Общее руководство по использованию и техническому обслуживанию

Результаты поиска

Содержание PM-1056/160

Отзывы:

Похожие инструкции для PM-1056/160

Бренды по названию

Популярные бренды